This is The TiberDyne Shuttle Booster System: http://kerbalspaceprogram.com/forum/index.php?topic=4435.0

This is an addon for Kerbal Space Program http://www.kerbalspaceprogram.com

It's also an auxiliary pack for the premiere aviation addon, C7 Spaceplanes, made by C7 Studios. To use any of the shuttle or plane parts in this pack, the latest version of his pack will be required.

C7 Spaceplanes thread: http://kerbalspaceprogram.com/forum/index.php?topic=1172.0


-----------------------------------------
Contained in this pack is the following:
-----------------------------------------


Shuttle Parts:
-----------------

Mark 3 Shuttle Fuselage engine mount (Allows you to place up to 3 engines individually, or attach the Shuttle Engine module directly. You'll also attach a fuel hose from this piece to the external tank.

Mark 3 Shuttle Engine Module - a single module consisting of 3 Bearcat rocket engines functioning as a single unit. Has a high angle of gimbal

BearCat Rocket Engine - a 0.5m rocket engine with light gimbaling - a powerhouse in a small package.

Bearcub Turbojet Engine - a 0.5m jet engine for use in atmospheric flight. Some magical trickery allows it to pull oxidizer from the internal tanks and work in a vaccuum (for now!)

Mark 3 Shuttle Wing Mounts - a mounting tank that goes on the side of the shuttle. The main wings attach to the sides and you can attach a Bearcub jet engine to the end for atmospheric flight.

Mark 3 Wing - The main wing of the shuttle. Provides lift.

Mark 3 Wing Flap - An aileron for the main wing.

Mark 3 Canard - the forward canard, used to provide control authority while in the atmosphere

Mark 3 Tail Fin - A tall tailfin for the Mark 3 shuttle

Mark 3 RCS module - half of the forward nose area - 6 vectors of RCS thrust provide control authority in orbit (Note: all other RCS must come from manually placed blocks - don't forget to add some more on the rear to balance things)

Mark 3 ASAS - The flight contoller package, compressed to fit in the nose cone. Frees up considerable interior cargo and mission space over the old inline ASAS unit.



Booster Parts:
-----------------

External tank - consists of 4 modular parts, the nosecone and bottom cap full of RCS fuel, and long and short tanks full of roccket fuel. Stack as much as you need to launch your mission

TD-4 Energia Boosters - Attaches to the side of the External tanks - Burns amount a minute and gets you moving upward nicely

Shuttle-Style Solid Boosters - These looks somewhat familiar - you see a small label on the bottom "NovaPunch" (original model by NovaSilisko)

SSRB nosecone - Its a nosecone for the Shuttle boosters. Also from NovaPunch, originally in Wobbly rockets and made by SundayPunch

External Tank Engine Package - Much like the Energia booster, the TiberDyne Shuttle Boooster System has an engine package that can attach to the bottom of the external tank (minus the bottom cap) to assist in lifting a heavy load (or launch a Buran-style shuttle-stack)



External Cargo Pod system:
-----------------------------

When you don't need to launch a shuttle, launch your cargo in this over-sized shell on the Shuttle Booster system.

Upper and Lower Shell pieces - Surrounds your cargo - both pieces snap onto the cargo mount to form a single unit. Limited collision detection, nothing can attach to them.

Cargo Mount - The base of the cargo pods, also has an engine shroud and 3 attachment points for Bearcat engines. This piece will attach to the fuel hose from the external tank, and the decoupler from the external tank can also attach here as well.

Pod Adapter - A decoupler that attaches to the Cargo Mount and recieves your cargo - used to place large (2meter and above) diamater cargo in the "center" of the cargo shell



Various assorted pieces:
----------------------------

Bearcub Turbojet engine mounts - Long and Short version - radially attaching tank and mount for the Bearcub jet engine

Thin Profile Decoupler - Super thin radial decoupler - used to connect boosters flush with the external tank. Has a mildly annoying surface connection node

Mark 2 Twin Engine mount - flaired mount to allow the Mark 2 C7 hull to attach 2 standard C7 jet engines. Can also accept Bearcat or BearCub engines.

Tail Fin - a generic control surface, smaller than the Shuttle tailfin, with a built-in flap.

Launch Stand - a red, ough-hewn steel girder used as a launch strut for the Shuttle Booster system - Use several to  hold your launch stack level on the pad.





----------------
Installation:
----------------
Delete any old version, Open the TD_ShuttleSystem folder and copy the folders within the "Parts" folder there into the "Parts" folder in your main directory. If you use GME you can just drag the whole TD_ShuttleSystem into your Mods folder.


-------------------------------
Alternate skin installation:
-------------------------------
Install pack normally then copy the folders within ExternalTanks->NASA-Style or Energia-Style over the folders by the same name in your Parts directory.


-------------
Craft files:
-------------
Go in the Ships folder - Requires this version of TD_SBS and the latest C7 Spaceplanes to load, as well as KSP 0.13 or HIGHER.